Pressure washing

A pressure washer sends water at high pressure through a narrow nozzle. It is used on flat roofsFlat roof (roof terrace)The flat concrete roof on top of a building. It is the most common kind of roof in Greece and the part that takes the most sun and rain., metal roofsMetal roof sheetingMetal sheets, flat or profiled, used for roofs and sheds. Light and quick to fit, but they get very hot and rust at the screws and cut edges., balconies and floors before a primerPrimerThe thin first coat that goes on before the main material. It binds dust, seals the pores and helps paint or waterproofing stick firmly., a waterproof coatingElastomeric waterproof coatingA thick, rubbery waterproof paint for flat roofs, parapets and roofs. It stretches without cracking as the building expands and bridges hairline cracks. or polyurethane foamSpray polyurethane foamA foam sprayed on as a liquid that expands on the spot and sets into one seamless layer. It insulates against heat and cold and closes cracks and joints. goes on.

Its job is to leave a clean surface. Dust, dirt and lichen stop materials from bonding. Washing also reveals spots that have come loose or crackedCrackA split or gap in render, concrete, a wall, a coating or wood. Fine cracks are usually only on the surface; ones that grow, keep reopening or run diagonally need attention. and need repairing before the work carries on.

After washing, the surface has to dry before anything goes on top. On soft or fragile materials, such as old renderRender (plaster)A layer of mortar (sand, cement or lime, and water) spread over brick or concrete to give a wall a straight, sound surface ready for paint or tiles. or worn groutGrout jointThe gap between tiles, slabs or stones, and the material that fills it. Grouting means filling these joints, which locks the surface together and keeps out water and dirt., a very strong jet can do damage, so the pressure and distance are adjusted to the surface.